Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Positive Junction Block Cable Nut | 9 N.m (80 lb in) |
| Drive Motor Power Inverter Module Bracket Bolt | 22 N.m (16 lb ft) |
| Drive Motor Power Inverter Module Bracket Nut | 22 N.m (16 lb ft) |
| Drive Motor Power Inverter Module Cover Bolt | 9 N.m (80 lb in) |
| Drive Motor Power Inverter Module Cover Nut | 10 N.m (89 lb in) |
| Drive Motor Power Inverter Module Shield Bolt | 9 N.m (80 lb in) |
| Engine Harness Ground Fastener | 9 N.m (80 lb in) |
| Generator Control Module 3 Phase Cable Bolt | 8 N.m (71 lb in) |
| Generator Control Module Bolt | 22 N.m (16 lb ft) |
| Generator Control Module Cable Housing Bolt | 9 N.m (80 lb in) |
| Generator Control Module Cable Cover Bolt | 9 N.m (80 lb in) |
| Generator Control Module Nut | 22 N.m (16 lb ft) |
| Generator Mounting Bolt | 22 N.m (16 lb ft) |
| Generator Mounting Nut | 22 N.m (16 lb ft) |
| Generator Mounting Stud | 9 N.m (80 lb in) |