Fastener Specifications (LGX)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, 2019 Buick Regal, and 2018 Buick Regal TourX. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Bolt | 22 N.m (16 lb ft) |
| Battery Hold Down Retainer Nut | 9 N.m (80 lb in) |
| Battery Negative Cable Frame Ground Fastener | 9 N.m (80 lb in) |
| Battery Negative Cable Nut (Battery Sensor) | 16 N.m (12 lb ft) |
| Battery Positive Cable Conduit Bolt | 9 N.m (80 lb in) |
| Battery Post Negative Cable Clamp Nut | 5 N.m (44 lb in) |
| Battery Post Positive Cable Clamp Nut | 5 N.m (44 lb in) |
| Battery Tray Fastener | 22 N.m (16 lb ft) |
| Engine Wiring Harness Fuse Block Bracket Bolt | 2.5 N.m (22 lb in) |
| Generator Mounting Bolt | 22 N.m (16 lb ft) |
| Generator Nut | 15 N.m (11 lb ft) |
| Starter Bolt | 58 N.m (43 lb ft) |
| Starter Solenoid Cable Nut | 12.5 N.m (111 lb in) |