LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Steering Wheel And Column) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application Specification
Metric (English)
Steering Column Nut 22 N.m (16 lb ft)
Steering Wheel Bolt 45 N.m (33 lb ft)
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Intermediate Steering Shaft Boot Bolt 9 N.m (80 lb in)
Intermediate Steering Shaft Lower Bolt 42 N.m (31 lb ft)
Intermediate Steering Shaft Upper Bolt 39 N.m (29 lb ft)
Steering Column Lock Control Module Bolt- Rear 9.5 N.m (84 lb in)
Steering Column Lock Control Module Bolt- Side 9.5 N.m (84 lb in)
Steering Column Lower Trim Cover Bolt 2.5 N.m (22 lb in)
Steering Wheel Spoke Cover Fastener 1.5 N.m (13 lb in)
Upper Intermediate Steering Shaft Upper Bolt 42 N.m (31 lb ft)