Circuit/System Verification
WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify DTC C056D is not set.
- If the DTC is set
- Perform all necessary programming and setup procedures for the control module: K43 Power Steering Control Module
- Verify the DTC does not set.
- If the DTC sets - Replace the component: K43 Power Steering Control Module
- Go to next step: If the DTC is not set
- All OK.
- Go to next step: If the DTC is not set
- All OK.