Installation Procedure
Windshield (1) - Install - Adhesive Installation of Windshields
Inside Rearview Mirror - (2) Install - Inside Rearview Mirror Replacement
Inside Air Moisture and Windshield Temperature Sensor (1) - Install - Inside Air Moisture and Windshield Temperature Sensor Replacement
{If equipped} Front View Camera (1) - Install - Front View Camera Replacement
Windshield Multifunction Sensor Mount Bracket Cover (1) - Install - Windshield Multifunction Sensor Mount Bracket Cover Replacement (without UHX) , or Windshield Multifunction Sensor Mount Bracket Cover Replacement (with UHX)
Windshield Garnish Molding (1) - Install - Windshield Garnish Molding Replacement
Air Inlet Grille Panel (2) - Install - Air Inlet Grille Panel Replacement
- Battery Negative Cable - Connect - Battery Negative Cable Disconnection and Connection
- Close the hood.
- Remove the double layer of masking tape around the perimeter of the painted surfaces.