Rear License Plate Lamp Module Replacement
WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Liftgate Lower Trim Finish Panel Replacement |
|
| 1 | Rear License Plate Lamp Nut [2x]
CAUTION:
Tighten 4.7 N.m (42 lb in) |
| 2 | Rear License Plate Lamp Module Procedure Disconnect the electrical connectors. |