Installation Procedure
- Wheel Speed Sensor (1) - Install
- Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)CAUTION:
- Retainer (1) @Rear Suspension Knuckle - Secure
- Retainer (1) @Rear Suspension Upper Trailing Link - Secure [2x]
- Retainer (1) @Rear Suspension Cradle - Secure
- Retainer (1) @Rear Suspension Cradle - Secure
- Wheel Speed Sensor Electrical Connector (1) - Connect
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Verify the repair is complete. Diagnostic Repair Verification