Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Retainer Bolt | 22 N.m (16 lb ft) |
| Battery Hold Down Strap Bolt | 9 N.m (80 lb in) |
| Battery Negative Cable Nut | 9 N.m (80 lb in) |
| Battery Negative Cable Ground Bolt | 22 N.m (16 lb ft) |
| Battery Negative Cable Ground Nut | 22 N.m (16 lb ft) |
| Battery Positive Cable Nut @ Engine Wiring Harness Junction Block | 16 N.m (12 lb ft) |
| Battery Positive Cable Nut @ Generator | 15 N.m (11 lb ft) |
| Battery Positive Cable Nut @ Starter Solenoid | 12.5 N.m (111 lb in) |
| Battery Post Negative Cable Clamp Nut | 4.5 N.m (40 lb in) |
| Battery Retainer Nut | 5 N.m (44 lb in) |
| Battery Tray Brace Nut | 22 N.m (16 lb ft) |
| Battery Tray Support Bolt | 22 N.m (16 lb ft) |
| Engine Control Module Bracket Bolt | 9 N.m (80 lb in) |
| Engine Wiring Harness Junction Block Stud | 22 N.m (16 lb ft) |
| Generator Bolt | 22 N.m (16 lb ft) |
| Multifunction Power Supply Converter Nut | 6 N.m (53 lb in) |
| Starter Bolt | 58 N.m (43 lb ft) |