Wheel Sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1988 Oldsmobile Ninety-Eight, 1988 Oldsmobile Delta 88, 1987 Oldsmobile Ninety-Eight, 1987 Oldsmobile Delta 88, and 1986 Oldsmobile Ninety-Eight. However, it is still accessible from the selected car via links, so may be relevant.
- On rear sensors, disconnect sensor connector in trunk area. Raise and support vehicle. Remove wheel and tire assembly. Remove sensor retaining screws. Remove sensor.
- On front sensors, disconnect sensor connector located near shock tower. Remove sensor retaining screw. Remove sensor. To install front or rear sensor, reverse removal procedure.
- Adjust sensor air gap to specification. See WHEEL SENSOR AIR GAP table in this article. Ensure sensor wiring is routed correctly as to avoid contact with suspension components.