All Others
- Remove mirror selector switch from armrest or instrument panel and leave switch connected to wiring harness. Connect a test light to ground and check for 12 volts at Orange wire. If test light glows, connect test light between Orange wire and Black wire. If test light does not light, check Orange and Black wire circuits.
- Operate right side mirror and check voltage at right side mirror switch. With switch in up position, Orange and Yellow wires should have 12 volts. All other wires should have zero volts. With switch in down position, Orange and Lt. Green (Lt. Green/Black on Skyhawk) wires should have 12 volts. All other wires should have zero volts.
- With switch in left position, Orange and Lt. Blue (Lt. Blue/Black on Skyhawk) wires should have 12 volts. And all other wires should have zero volts. With switch in right position, Orange and White (White/Black on Skyhawk) wires should have 12 volts. All other wires should have zero volts.
- Operate left side mirror and check voltage at left side mirror switch. With switch in up position, Orange and Yellow wires should have 12 volts. All other wires should have zero volts. With switch in down position, Orange and Lt. Green wires should have 12 volts. All other wires should have zero volts.
- With switch in left position, Orange and Lt. Blue wires should have 12 volts. All other wires should have zero volts. With switch in right position, Orange and White wires should have 12 volts. All other wires should have zero volts.