Pcm Data

Enter the following modes on climate control panel and watch operation of sensors and transaxle. Repeat the same test steps as during road test. See ROAD TEST  under TESTING:

• PD74 "A" Current
  
  Line pressure should be low with over 1 amp current. Line\pressure should be high with less than 1 amp current.
• PD72 Turbine
  
  Signal should be close to engine RPM.
• PD73 Slip Speed
  
  When TCC/VCC is release, numbers around 100 should be displayed. With TCC/VCC applied, numbers around 10 should be displayed.
• PD76 Ratio
  
  Should display transaxle ratios while in specific gear range (1st - 2.96, 2nd - 1.63, 3rd - 1.00, 4th - .68, "R" - 2.13).
• PD77 Transaxle Temperature
  
  Displays transaxle temperature in centigrade.
• PD82 Shift Time
  
  Displays shift time. Shift time is usually about .25 second (except for first gear).