Transmitter Programming
NOTE:
Ensure reprogramming procedure is completed within 30 seconds of grounding reprogramming connector. If reprogramming procedure is not completed in 30 seconds, remove ground from connector and repeat procedure.
- Turn ignition on. Ground Black/White wire (Green connector) located in trunk, next to keyless entry module. See Fig 1 and Fig 2 . Wait for door locks to lock and unlock (approximately 2 seconds).
- Press unlock button of first transmitter twice with a pause. Wait for door locks to lock and unlock again (approximately 2 seconds). Repeat this step using second transmitter. If only one transmitter is being used, repeat this step with same transmitter. Remove Black/White wire ground from Green connector.