Preliminary Tests
WARNING: This page is about a different car, the 1996 Cadillac Seville and 1996 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Remove starter from vehicle. See STARTER under REMOVAL & INSTALLATION. Check starter for damage such as broken or stripped electrical terminals, broken or cracked drive end housing, etc. If no obvious damage is found, perform starter no-load test and pinion clearance check before disassembling starter motor.
NOTE:
On PG260 and PG260M starter motors, starter is serviced as an assembly. If test values do not meet specifications, replace starter and solenoid as an assembly.