Ground Circuits
WARNING: This page is about a different car, the 1998 Cadillac Seville, 1998 Cadillac Eldorado, and 1998 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
- Using an ohmmeter, check for continuity to ground at PCM ground terminals. See POWERTRAIN CONTROL MODULE (PCM) CONNECTOR I.D. table. Resistance should be zero ohms. If not, repair open to ground.
- Using a voltmeter, connect negative lead of voltmeter to a good ground. Backprobe positive lead of voltmeter to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If voltmeter reading is more than one volt, check for open, short to voltage, corrosion or loose connection on ground circuit.