Left Seat Does Not Manually Move In Any Direction
NOTE:
After repair or component replacement is completed, perform MEMORY SYSTEM CHECK
under TESTING - SYSTEM CHECKS to verify system is operating properly.
- Perform MEMORY SYSTEM CHECK under TESTING - SYSTEM CHECKS. Go to next step.
- Disconnect MSM Light Green, 6-pin connector C2. Using DVOM, check voltage between MSM harness connector C2, terminals "D" (Orange wire) and "C" (Black wire). If 10-15 volts exists, go to next step. If 10-15 volts does not exist, go to step 5).
- Disconnect left seat switch Black, 12-pin connector. Check voltage between MSM harness connector C2, terminal "D" (Orange wire) and left seat switch harness connector terminal "H" (Black wire). If 10-15 volts exists, go to next step. If 10-15 volts does not exist, go to step 6).
- Replace left seat switch. See SEATS - POWER article.
- Repair open in circuit No. 850 (Black wire) between MSM and splice S351.
- Repair open in circuit No. 850 (Black wire) between left seat switch and splice S351.