Cruise Control Components
COMPONENT LOCATIONS
| Application | Location |
|---|---|
| Accelerator Pedal Position (APP) | Top of the Accelerator pedal, on the mounting bracket |
| Cruise Control Switch | LH side of the steering column |
| Cruise Control Release Switch | On Brake Pedal Bracket |
| Engine Control Module (ECM) | LH front of the engine compartment , in the ECM housing |
| Engine Control Module (ECM) C1 | LH front of the engine compartment, in the ECM housing |
| Engine Control Module (ECM) C2 | LH front of the engine compartment, in the ECM housing |
| Fuse Block | Mounted to the I/P, lower LH side of the steering column |
| Instrument Cluster | LH side of the I/P, above the steering column |
| Stop Lamp Switch | Attached to the brake pedal bracket assembly |
| Throttle Position (TP) Sensor | Attached to the throttle body |
| P104 | In the LH engine compartment, in the ECM housing |
| S121 | ECM wiring harness, inside the ECM housing, approximately 4 cm (2 in) from P108 |
| S200 | I/P wiring harness, approximately 15 cm (6 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off |
| S206 | I/P wiring harness, approximately 22 cm (9 in) from P110, towards connector C200 branch break off |
| S208 | I/P wiring harness, in stop lamp switch branch break off |
| S229 | I/P wiring harness mounted in harness channel behind LH side of heater and A/C control unit, approximately 25 cm (10 in) from cruise release switch and stoplamp switch branch break off |
| S253 | I/P wiring harness, approximately 28 cm (11 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off |