Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE
1. Remove the fuel tank.
2. Remove the air reference hose (3) from the fuel tank pressure sensor.
3. Disconnect the electrical connector (6) from the fuel tank pressure sensor.
4. Remove the fastener (4) retaining the fuel tank pressure sensor and remove the sensor.

INSTALLATION PROCEDURE
1. Clean any contamination from the sensor mounting area.

NOTE: Refer to Component Tightening Notice in Service Precautions.

2. Install the fuel tank pressure sensor.

Tighten
Tighten the fastener to 2 N.m (18 lb in).

3. Connect the electrical connector to the fuel tank pressure sensor.
4. Connect the air reference hose to the fuel tank pressure sensor.
5. Install the fuel tank.