Power Mirror Control Module: Service and Repair

REMOVAL PROCEDURE
1. Open the driver door.
2 Remove the close-out insulator panel.
3 Disconnect the electrical connector (3) from the memory mirror module (MMM) (1).
4. Release the locking tab (2) in order to remove the module (1).
5 Slide the module rearward in order to remove.

INSTALLATION PROCEDURE.
1. Slide the memory mirror module (1) into the bracket.
2 Ensure the locking tab (2) is secure.
3 Connect the electrical connector (3).
4. Install the close-out insulator panel.
5 Close the driver door.