Front Wheel Toe Adjustment

1. Loosen the jam nuts (1) on the tie rod.

Notice: Care must be taken so that the boots are not twisted when rotating the inner tie rod, or damage to the boots may result.

2. Rotate the inner tie rod to the required toe specification setting.

Notice: Refer to Fastener Notice in Service Precautions.

3. Tighten the jam nuts on the tie rods.
- Tighten the jam nuts to 64 Nm (47 ft. lbs.).
4. Recheck the toe settings after tightening the jam nuts.
5. Readjust the toe setting if necessary.