Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Install the new level sensor switch grommet into the container.
Use the washer solvent in order to lubricate the grommet in order to ease installation of the level sensor switch.
Position the level sensor switch to the grommet, apply equal downward pressure in order to secure the level sensor switch into the grommet.
Connect the electrical connector to the level sensor switch.
Verify the operation of the level sensor switch.

Fig 1: Installing Level Sensor Switch & Electrical Connector
Courtesy of GENERAL MOTORS CORP.