Using Driver Information Center

To enter programming with Driver Information Center (DIC), perform following actions:

1. Turn ignition switch to RUN position.
2. Place transaxle in Park.
3. Press MEMORY seat button No. 1 or 2 depending on driver for this session of personalization programming.
4. Press INFO button on DIC until DIC displays FEATURE PROGRAMMING.
5. Press ON/OFF button to enter programming mode.
6. DIC displays DRIVER #1 or DRIVER #2 depending on chosen driver for this session of personalization programming.
7. Press INFO button up or down to scroll through feature choices.

Continue with following steps to personalize automatic door locks with DIC:

1. DIC displays DOORS LOCK IN GEAR.
2. Press ON/OFF button to turn this feature ON or OFF.
3. Press INFO button to advance to next option.
4. Use ON/OFF button to turn one of following features On or OFF, only one choice can be On at any given time:
   • DRIVER UNLOCK IN PARK.
   • DRIVER UNLOCK AT KEY OFF.
   • DOORS UNLOCK IN PARK.
   • DOORS UNLOCK AT KEY OFF.
5. Press INFO button to advance to next option.