Using Scan tool

To enter programing with scan tool, perform following actions:

1. Connect scan tool to Data Link Connector (DLC). DLC is located under left side of instrument panel.
2. Turn ignition switch to RUN position.
3. Select correct vehicle and model year.
4. Select BODY.
5. Select PERSONALIZATION.

Continue with following steps to program automatic door locks:

1. Select SET OPTIONS.
2. Select DRIVER #1 AUTOMATIC DOOR LOCK MODE or DRIVER #2 AUTOMATIC DOOR LOCK MODE.
3. Highlight desired mode from following choices (see TRANSMITTER PERSONALIZATION  for mode descriptions:
   • MODE 0.
   • MODE 1.
   • MODE 2.
   • MODE 3.
   • MODE 4.
   • MODE 5.
4. Exit menu.