LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2001 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Repair Instructions >> SIR Disabling and Enabling Zone 3 >> Enabling Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enabling Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Steering Wheel Module Coil Connector Removed
    GM68614Courtesy of GENERAL MOTORS CORP.
  1. Remove the key from the ignition switch.
  2. Connect the inflatable restraint steering wheel module coil connector located at the base of the steering.
  3. Fig 2: Steering Wheel Module Coil & CPA
    GM68613Courtesy of GENERAL MOTORS CORP.
  4. Install the CPA to the steering wheel module coil connector located at the base of the steering column.
  5. Fig 3: I/P Fuse Block & SDM Fuse
    GM68610Courtesy of GENERAL MOTORS CORP.
  6. Install the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
  7. Install the SDM Fuse to the I/P fuse block.
  8. Install the front floor kick-up panel. Refer to Kick-Up Panel Replacement - Front Floor in Interior Trim.
  9. Staying well away from both air bags, turn the ignition switch to the ON position.
    1. The AIR BAG indicator will flash seven times.
    2. The AIR BAG indicator will then turn OFF.
  10. Perform the Diagnostic System Check - SIR  if the AIR BAG indicator does not operate as described.