Memory Seats/Steering Column/Mirrors Programming

Perform the following actions in order to program the memory seats, the memory steering column, and the memory mirrors:
1. Move the seat, the steering column, and the sideview mirrors to the desired position.
2. Press the SET button.
3. Press the 1 button or the 2 button (depending on the driver). A chime will sound to indicate that the setting has been saved.
4. Repeat the steps for the second driver.
5. Move the seat, the steering column, and the sideview mirrors to the desired exit position.
6. Press the SET button.
7. Press the EXIT button.
8. Press the 1 button or the 2 button (depending on the driver). A chime will sound to indicate that the setting has been saved.
9. Repeat the steps for the second driver.