Wheel Alignment Specifications

Front	Caster	Service Allowable	5.5 - 6.5 Degrees (deg)
		Service Preferred	6 Degrees (deg)
	Cross Caster	Service Allowable	-0.5 - 0.5 Degrees (deg)
		Service Preferred	0 Degrees (deg)
	Camber	Service Allowable	-0.7 - 0.3 Degrees (deg)
		Service Preferred	-0.2 Degrees (deg)
	Cross Camber	Service Allowable	-0.5 - 0.5 Degrees (deg)
		Service Preferred	0 Degrees (deg)
	Sum Toe	Service Allowable	0 - 0.4 Degrees (deg)
		Service Preferred	0.2 Degrees (deg)
	Steering Wheel Angle	Service Allowable	3 - 3 Degrees (deg)
		Service Preferred	0 Degrees (deg)
Rear	Camber	Service Allowable	-0.8 - 0.2 Degrees (deg)
		Service Preferred	-0.3 Degrees (deg)
	Cross Camber	Service Allowable	-0.8 - 0.2 Degrees (deg)
		Service Preferred	-0.3 Degrees (deg)
	Sum Toe	Service Allowable	0 - 0.4 Degrees (deg)
		Service Preferred	0.2 Degrees (deg)
	Thrust Angle	Service Allowable	-0.1 - 0.1 Degrees (deg)
		Service Preferred	0 Degrees (deg)
Z Trim Height	6KS69, FE1 and F45	Service Allowed	1.2 - 2.0 Inch (in)
		Service Preferred	1.5 Inch (in)
	6KS69, FE3	Service Allowed	0.78 - 1.6 Inch (in)
		Service Preferred	1.2 Inch (in)
	6KY69, FE3 and F45	Service Allowed	0.78 - 1.6 Inch (in)
		Service Preferred	1.2 Inch (in)
D Trim Height	6KS69, FEI and F 45	Service Allowed	3.0 - 3.8 Inch (in)
		Service Preferred	3.4 Inch (in)
	6KS69, FE3	Service Allowed	2.6 - 3.4 Inch (in)
		Service Preferred	3.0 Inch (in)
	6KY69, FE3 and F45	Service Allowed	2.6 - 3.4 Inch (in)
		Service Preferred	3.0 Inch (in)