LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Lamp Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the IP trim bezel. Refer to BEZEL REPLACEMENT - IP CLUSTER .
    2. Fig 1: Locating Retaining Clips
    G01696709Courtesy of GENERAL MOTORS CORP.
  2. Remove the head lamp switch/4WD shift button housing from the IP by pulling outwards.

    The arrows in the graphic shows the locations of the retaining clips.

  3. Disconnect all the electrical connectors.
  4. Remove the electrical tape around the lamp module and discard.
  5. Remove the lamp module from the connector by pulling outwards.
    Fig 2: Lamp Control Module
    G01696710Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals