LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Electronic Suspension System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Air Dryer and Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the automatic level control air dryer to the automatic level control air compressor.
  2. Push the air dryer/pressure sensor assembly in while rotating the air dryer/pressure sensor assembly counterclockwise until the assembly attaches to the automatic level control air compressor body.
  3. Install the air dryer/pressure sensor assembly retaining screw.
  4. Connect the electrical connector to the pressure sensor.
  5. Install the automatic level control air compressor to the vehicle. Refer to Air Compressor Replacement .
scientia non olet · About LEMON Manuals