Removal and Replacement

REMOVAL PROCEDURE




1. Remove the drivers side door panel.
2. Remove the screws (1) that retain the accessory and outside rear view mirror module from the door panel.
3. Remove the nut (2) that retains the accessory and outside rear view mirror module from the door panel.
4. Remove the module from the door panel.

INSTALLATION PROCEDURE




1. Install the module to the door panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut (2) that retains the accessory and outside rear view mirror module to the door panel.

Tighten
Tighten the module retaining nut to 0.6 N.m (5 lb in).

3. Install the screws (1) that retain the accessory and outside rear view mirror module to the door panel.

Tighten
Tighten the module retaining screws to 0.6 N.m (5 lb in).

4. Install the drivers door panel.
5. Perform the memory mirror module learn procedure. Refer to Memory Mirror Module (MMM) Learn Procedure.