Electronic Throttle Control Module: Service and Repair

THROTTLE ACTUATOR CONTROL (TAC) MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Release the retainer tab from the left side of the throttle actuator control (TAC) module.
2. Slowly slide the TAC module out of the retaining bracket.
3. Disconnect the TAC module connectors from the TAC module.

INSTALLATION PROCEDURE




1. Connect the TAC module connectors to the TAC module.
2. Slide the TAC module into the TAC module bracket.
3. Push the TAC module towards the bracket in order to snap the TAC module into the bracket.