Heated Seat Control Module Replacement - Rear

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution in Service Precautions.




1. Remove the rear seat back.
2. Disconnect the electrical connectors to the heated seat module.
3. Remove the fasteners from the heated seat control module.
4. Remove the rear heated seat module from the seat back.

INSTALLATION PROCEDURE




1. Install the heated seat module to the seat back.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the heated seat module fasteners (1).
3. Connect the heated seat module electrical connections.
4. Install the rear seat back.