Removal and Replacement

Heated Seat Control Module Replacement - Front

Removal Procedure

Caution: Refer toSIR Caution in Cautions and Notices




1. Remove the front seat cushion. Refer toSeat Cushion Replacement - Front (Seat Cushion Replacement - Front)
2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.



Installation Procedure






Notice: Refer toFastener Notice in Cautions and Notices.

1. Install the heated seat control module and install the retaining screws (2).

Tighten the screws to 2 Nm (18 lb in).

2. Connect the electrical connector.
3. Install the seat cushion. Refer toSeat Cushion Replacement - Front (Seat Cushion Replacement - Front) .