Removal Procedure
- Remove the I/P trim panel. Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER
in Instrument Panel, Gages and Console.
- Lower the headliner. Refer to HEADLINER REMOVAL/INSTALLATION
in Interior Trim.
- Loosen the bolt retaining the radio antenna module in order to disconnect the electrical connector.
- Disconnect the cable (2) from the radio antenna module.
Courtesy of GENERAL MOTORS CORP.
- Remove the cable clips (1) from the roof.
- Remove the cable clips (1) from the A-pillar.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the cable (3) from the radio.
- Disconnect the electrical wire connector (4).
- Remove the radio cable from the vehicle.