LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Diagnostic Information and Procedures >> Scan Tool Data Definitions >> Driver Door Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Door Module

Back Only Heat Indicator:  The scan tool displays On or Off. The scan tool displays the current status of the heated seat back only operating mode determined by the heated seat switch signal circuit inputs to the driver door module.

Back Only Heat Indicator:  The scan tool displays On or Off. Whenever the heated seat back only indicator is commanded on by the driver door module the scan tool displays On.

Back Only Heat Switch:  The scan tool displays Active or Inactive. When the heated seat back switch is pressed the scan tool displays Active.

Heat Indicator High:  The scan tool displays On or Off. The scan tool displays the current status of the high heat operating mode determined by the heated seat switch signal circuit inputs to the driver door module.

Heat Indicator High:  The scan tool displays On or Off. Whenever the high heat indicator is commanded on by the driver door module the scan tool displays On.

Heat Indicator Low:  The scan tool displays On or Off. The scan tool displays the current status of the low heat operating mode determined by the heated seat switch signal circuit inputs to the driver door module.

Heat Indicator Low:  The scan tool displays On or Off. Whenever the low heat indicator is commanded on by the driver door module the scan tool displays Off.

Memory Switch:  The scan tool displays Memory 1, Memory 2, Both, or Idle. The scan tool displays the current memory switch status determined by the memory 1 and memory 2 signal circuit inputs to the driver door module.

Heat Indicator Medium:  The scan tool displays On or Off. The scan tool displays the current status of the medium heat operating mode determined by the heated seat switch signal circuit inputs to the driver door module.

Heat Indicator Medium:  The scan tool displays On or Off. Whenever the medium heat indicator is commanded on by the driver door module the scan tool displays On.

Heated Seat Switch:  The scan tool displays Active or Inactive. When the heated seat cushion switch is pressed the scan tool displays Active.