LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive side knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  2. Unseat the accelerator cable retainer (3) from the accelerator pedal lever (2).
  3. Fig 1: View Of Accelerator Cable Tangs, Pedal Lever & Cable Retainer
    GM372959Courtesy of GENERAL MOTORS CORP.
  4. Remove the end bushing retaining clips.
  5. Remove the end bushings from the pivot shaft.
  6. Remove the accelerator pedal.