Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.

Lubricate the NEW injector O-ring seals with clean engine oil.
Install the fuel injector (3) into the fuel meter body injector socket.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the injector retainer (4) and the injector retainer lock nuts (2).
Tighten: Tighten the nuts to 3 N.m (27 lb in).

Fig 1: View Of Fuel Meter Body Assembly Components

Courtesy of GENERAL MOTORS CORP.

Install the fuel meter body. Refer to Fuel Meter Body Assembly Replacement .