LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar switch to the power seat switch bezel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lumbar switch screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement .
    4. Fig 1: View Of Lumbar Switch & Power Seat Switch Bezel
    GM409526Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals