LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Door System, Mirror System & Window System) >> Repair Instructions >> Module Replacement - Front Power Window >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the regulator to the inside door structure. A slight twisting motion of the regulator is needed.
  2. Ensure the regulator is positioned firmly in the door.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT: Place Permatex Threadlocker, Part Number 24200, GM P/N 12345382, onto the regulator bolt threads prior to tightening.
  3. Install the bolts to the window regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Align the window glass to the regulator.
  5. Install the bolts that hold the window to the regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

    6. Fig 1: Installing Front Power Window Module
    GM348453Courtesy of GENERAL MOTORS CORP.
  6. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  7. Install the trim panel. Refer to Trim Panel Replacement - Side Front Door (With YE9 Early Production)  or Trim Panel Replacement - Side Front Door (With YE9 Late Production) .
  8. Lower the window and inspect the operation.
scientia non olet · About LEMON Manuals