LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 455 (Entertainment System) >> Repair Instructions >> Radio Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the coaxial cable to the radio.
  2. Connect the wire connectors.
  3. Push in the radio assembly in the opening in order to install the screws.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screws (1).

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

    5. Fig 1: Installing Radio Assembly & Screws
    GM854851Courtesy of GENERAL MOTORS CORP.
  5. Install the cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  6. Perform the radio setup, if equipped with UM8. Refer to Radio Setup (With RPO UM8) .

    Refer to Service Programming System (SPS) in Programming for all other audio system configurations for setup.

scientia non olet · About LEMON Manuals