Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Insert A Flat-Bladed Tool Under The Front Edge Of The Switch To Release Retainer From Door Trim Panel

Courtesy of GENERAL MOTORS CORP.

Insert a flat - bladed tool under the front edge of the switch to release the retainer from the door trim panel.
Disconnect the electrical connector from the lock switch.

Fig 2: Using Flat-Bladed Tool To Disengage The Locking Tabs From Both Sides Of The Switch

Courtesy of GENERAL MOTORS CORP.

Use a flat - bladed tool to disengage the locking tabs from both sides of the switch.
Remove the lock switch.