Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Bumper Nuts | 25 N.m | 18 lb ft |
| Catalytic Converter (to Exhaust Manifold) Nuts | 50 N.m | 37 lb ft |
| Drive Shaft Center Bearing Heat Shield Bolts | 8 N.m | 71 lb in |
| Exhaust Manifold Heat Shield Bolts (Except LS6) | 10 N.m | 89 lb in |
| Exhaust Manifold Heat Shield Bolts (LS6) | 9 N.m | 80 lb in |
| Exhaust Manifold (to Cylinder Head) Bolts (LH2) | 25 N.m | 18 lb ft |
| Exhaust Manifold (to Cylinder Head) Bolts (LY7) | 20 N.m | 15 lb ft |
| Exhaust Manifold (to Cylinder Head) Nuts (LH2) | 30 N.m | 22 lb ft |
| Exhaust Pipes (to Catalytic Converter) Nuts (LS6) | 30 N.m | 22 lb ft |
| Muffler Nuts (LY7) | 22 N.m | 16 lb ft |
| Muffler (Exhaust Pipe) to Exhaust Manifold Nuts (LH2) | 30 N.m | 22 lb ft |
| Tunnel Brace Bolts | 25 N.m | 18 lb ft |