Scan Tool Data Definitions

Compressor Signal:  Indicates when the compressor relay is activated.

Controller Battery Volts:  Range 10.0 V - 16.0 V This data refers to the battery system voltage as measured by the suspension control module.

Exhaust Signal:  Indicates when the exhaust solenoid is commanded on or off.

Left Rear Position Sensor:  Range 0.5 V - 4.85 V This data refers to vehicle height measured in volts.

Rear Leveling Air Press:  Indicates the system pressure in psi.

Rear Leveling Air Press:  Indicates the system pressure in volts.

Right Rear Position Sensor:  Range 0.5 V - 4.85 V This data refers to vehicle height measured in volts.

Sensor Supply Voltage:  Indicates the voltage being supplied to the sensors from the suspension control module.

Vehicle Speed:  The speed of the vehicle.