Front Auxiliary

REMOVAL PROCEDURE




1. Remove the console roof screw.
2. Remove the console (1) from the headliner.
3. Disconnect the electrical connectors (3) from the console (1).
4. Remove the console (1) from the vehicle.
5. Remove the HVAC control assembly (2) from the console (1) by depressing the 4 tabs on the back of the HVAC control assembly (2).

INSTALLATION PROCEDURE




1. Install the HVAC control assembly (2) to the console (1).
2. Connect the electrical connectors (3) to the console (1).
3. Install the console (1) to the headliner.
4. Install the overhead console screw.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screw to 2 N.m (18 lb in).