Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Radio Antenna Module

Courtesy of GENERAL MOTORS CORP.

Install the radio antenna module to the roof beam, ensuring that the alignment tab is properly located.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install radio module retaining fastener.
Tighten: Tighten the fastener to 9 N.m (80 lb in).
Connect the electrical connectors to the radio antenna module.
Install the rear assist handles. Refer to Assist Handle Replacement in Interior Trim.
Install the left rear sail panel. Refer to Sail Panel Replacement (Standard) in Interior Trim.