LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 479 (Entertainment System) >> Repair Instructions >> Radio Antenna Module Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Cable Clips
    GM428726Courtesy of GENERAL MOTORS CORP.
  1. If the antenna cable is to being replaced, install the antenna cable clips (3) from the antenna cable being removed from the vehicle to the new antenna cable.
  2. Install the antenna cable to the roof beams with the clips (3).
  3. Fig 2: Identifying Antenna Connection
    GM827590Courtesy of GENERAL MOTORS CORP.
  4. Install the antenna connection (1) at the front of the vehicle.
  5. Fig 3: Identifying Antenna Coaxial Cable
    GM827573Courtesy of GENERAL MOTORS CORP.
  6. Connect the antenna cable (2) to the antenna module, at the rear of the vehicle.
  7. Install the headliner. Refer to Headliner Replacement (w/o CF5) or Headliner Replacement (w/ CF5) in Interior Trim.
  8. Install the sail panel. Refer to Sail Panel Replacement (Standard) in Interior Trim.
  9. Install the center pillar trim panel. Refer to Garnish Molding Replacement - Center Pillar in Interior Trim.
  10. Install the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar (Standard) in Interior Trim.