Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector to the cruise control module (1).

Fig 1: View of Cruise Control Cable & Cruise Control Module Buckle

Courtesy of GENERAL MOTORS CORP.

Install the cruise control cable (3) to the cruise control module assembly buckle (2).
Snap the cruise control cable (3) into the cruise control module (1).

Fig 2: View Of Cruise Cable Fitting & Pin

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.

Install the cruise control cable (2) to the engine bracket.
Verify that the tab on the cable is engaged.
Hold the throttle open and slide the cruise control cable fitting (2) onto the throttle cam pin (1).

Fig 3: Identifying Cruise Control Cable

Courtesy of GENERAL MOTORS CORP.

Install the clamps around the cruise control cable (1) and the accelerator cable.