LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Front Door Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Insert a flat bladed tool under the rear edge of the front window switch plate.
    NOTE: The retainer clip must be fully disengaged before the switch plate is removed. Otherwise, damage to the switch plate could result.
    Fig 1: Inserting Flat Bladed Tool Under Rear Edge Of Front Window Switch Plate
    G02179835Courtesy of GENERAL MOTORS CORP.
  2. Push the tool firmly towards the switch plate, in order to disengage the retainer.
  3. Lift up on the rear of the switch plate in order to remove the switch assembly from the door trim panel.
  4. Disconnect the electrical connectors.
  5. Remove the switch assembly.
  6. Remove the appropriate switch from the switch plate by disengaging the side snap walls with small flat bladed tool.
scientia non olet · About LEMON Manuals