LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the control module (2) to the wire harness shield (1) of the lower steering column.
    Fig 1: Installing Control Module To Wire Harness Shield
    G02068376Courtesy of GENERAL MOTORS CORP.
  2. Connect the control module electrical connectors (2).
    Fig 2: Connecting Control Module Electrical Connectors
    G02068377Courtesy of GENERAL MOTORS CORP.
  3. Install the knee bolster. Refer to KNEE BOLSTER REPLACEMENT  in Instrument Panel, Gages, and Console.
  4. Enable the SIR system. Refer to ZONE 3 in Air Bag Restraint Systems. .
  5. Program the steering column control module. Refer to STEERING COLUMN CONTROL MODULE PROGRAMMING   .
scientia non olet · About LEMON Manuals