April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Inserting Flat Bladed Tool Under Front Edge Of Front Door Switch

GM754073

Courtesy of GENERAL MOTORS CORP.

Insert a flat bladed tool under the front edge of the front door switch.
Push the tool firmly towards the switch to disengage the retainer.
Lift up on the rear of the switch plate to remove it from the door trim panel.
Disconnect electrical connectors.

Fig 2: Removing Switch From Bezel

GM754069

Courtesy of GENERAL MOTORS CORP.

Remove the appropriate switch from the bezel by disengaging the side snap walls with a small flat bladed tool.