Removal and Replacement

Front Seat Heater Control Module Replacement

Removal Procedure

Caution: Refer toSIR Caution .




1. Remove the front seat cushion. Refer toFront Seat Cushion Replacement (Front Seat Cushion Replacement) .
2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.



Installation Procedure






Notice: Refer toFastener Notice .

1. Install the heated seat control module and install the retaining screws (2).

Tighten the screws to 2 Nm (18 lb in).

2. Connect the electrical connector.
3. Install the seat cushion. Refer toFront Seat Cushion Replacement (Front Seat Cushion Replacement) .