Front Toe Adjustment
- Loosen the jam nut (2) on the tie rod.
- Rotate the inner tie rod to the required toe specification setting.
- Tighten the jam nut on the tie rods.
Tighten: Tighten the jam nut to 60 N.m (44 lb ft).
- Recheck the toe settings after tightening the jam nut.
- Readjust the toe setting if necessary.
NOTE:
Care must be taken so that the boots are not twisted when rotating the inner tie rod, or damage to the boots may result.
NOTE:
Refer to Fastener Notice in Cautions and Notices.